MiLAN MIL-RCM16A Especificações descarregar pdf (Página 63)

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

3. Lower the platform to the ground and

remove the pressure compensation

valve (FIG. 63-1) located at the top

of each column. Check if pressure

compensation valves are contaminated.

Disassemble, try to move plunger with

small screwdriver, and then clean each

valve if required (FIG. 63-1). Reinstall

or replace each valve if necessary.

4. Check for bent parts on the Liftgate that

could interfere with normal operation.

FIG. 63-1

FLOW CONTROL

VALVE

SCREWDRIVER

“D” VALVE (REF)

CYLINDER

(REF)

NOTE: Do the BLEEDING HYDRAULIC

SYSTEM procedure in this manual

with the following step.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 85 86

Sem comentários

MiLAN MIL-RCM16A Especificações Página 63